| Now that your case is assembled, put the door and it should look something like this ==>
Now, time to make sure it works. Connect all of your external components to the computer, plugging the power cable in last. We also recommending cleaning up all of your boxes, tools, and other materials before starting it up, since you will be able to focus more on getting it working. Once all of that is cleaned up. Let's fire her up...there is a whole other process of actually preparing and tweaking the BIOS and then installing the operating system, however we will save that for a different article. Once you have determined that all of the components work, you can go back in and do some cable management. For now, enjoy these pictures of case completed case:
|
 |
| The picture above is what this case looked like before we did some cable management. The picture below is what cable managment does for this case: |
The picture above is what the case looks like with the lights on, with the room lights on, below is what it looks like with them off. |
Above is another shot pre-cable management. Below is a shot of post-cable management with the cover off. |
